Leviton® Smart 24V Dimming Wallbox Sensor, App Configurable, Auto-ON/Auto-OFF or Manual-ON/Auto-OFF, Neutral Wire Not Required, Passive Infrared (PIR) Sensor, 2100 sq-ft Coverage, 12 to 24 VDC, White, 4.13 in H x 2.12 in W x 1.86 in D

• Can be used to comply with IECC, ASHRAE 90.1, and 2019 Title 24, Part 6 occupancy/vacancy sensing and dimming requirements
• Fits in a standard wallbox and gangable with other units
• ODD24-IDW is designed for use with a power pack (OPP20 or OSA20) or other Leviton low voltage (24V) source
• 180° field-of-view provides approximately 1,100 square feet of coverage
• Maximum sensing distance in front of the sensor is 30-40 feet and 15-20 feet on either side
• Advanced configuration can be performed using the Leviton Smart Sensor App on any Bluetooth enabled Android or iOS device: Set operating mode to Auto-ON/Auto-OFF or Manual-ON/Auto-OFF
  • Adjust the sensitivity of the sensor to increase or decrease coverage area
  • Adjust timeouts
  • Activate the nightlight and select nightlight colors
• Add daylighting hold-off and select target daylighting hold-off levels
• Set a security code to lock configuration settings
• Configure dimming options such as Partial-0N, Partial-OFF, and Partial-OFF timeouts
• Out-of-the-box configuration default mode:
  
  • Auto-ON/auto-OFF with 10-minute time out
  • Sensitivity set to 75%
  • Nightlight and daylighting hold-off disabled

• 
  Brochure
• 
  Brochure
• 
  Specification Sheet
• 
  Specification Sheet